Extra Large White off Floral Patch Iron On.Heat Transfer Embroidery Applique for DIY Craft Costume Embellishment. Dress Denim Accessory.Washable .
Iron On Embroidery Hot Fix Patch Applique for Crafts - has a special hot fix back layer for an easy apply.
42 cm x 16 cm applique
That applique has 2 sides: one is the front is the embroidery side (or face side) which you will see on your product and the other side is glued with special layer so it can be attached to your product/project.
You can use it on everything fabric made - Bags, T-shirts, Shirts, Accessories even home decorations etc. Due to monitor settings colors may differ. Measurements are a close approximate items can vary slightly in size. ☣How to Apply☣
1. Set your iron at medium to high temperature. 2. Place your patch on garment. 3. Cover your patch with a thin cloth. 4. Iron for 10-20 seconds with constant pressure. 5. Turn garment inside out and repeat step 5. NO BACK AND FORTH! 6. Let it cool for one minute. If edges come up, repeat. (***For large iron on patch, secure much better by sewing down with a machine or hand stitch)
☣Precaution☣ Do NOT bleach. Do NOT use steam during application. Do NOT use on unironable fabrics (low melting point) such as nylon, vinyl, plastic or leather.
Iron on appliques and embroidered patch setting instructions using an Iron:
Step 1: Set your hand iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION! Step 2: Place your applique or embroidered patch in the desired position and place a pressing cloth (such as a handkerchief, sheet or pillowcase fabric) over top.White glue is side down. Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.Remove a plastic membrane after step 3. Step 4: Turn the garment inside-out and repeat steps 2 & 3. Step 5: Allow the applique or embroidered patch to cool down.